BLOCK GRIP ADHESIVE

Mortar

BLOCK GRIP ADHESIVE

DESCRIPTION

It's a single-component thixotropic thin-bed fixing and jointing block grip adhesive. It contains an aggregate ratio of graded inert sand with cement and polymers for applications as a bond-gripping material in civil construction works. It is recommended for fixing and joining AAC blocks, ALC blocks, Cement mortar blocks, Cellular concrete blocks, Fly ash bricks, and Composite cement blocks.


FEATURES

Cohesive and Workable Adhesive

Self-Cured

Shock & Impact Resistant

PACK SIZE:
40 kg

9 BENEFITS
  • Cohesive & workable mortar.
  • High tensile & Flexural strength with strong bonding.
  • Consistent spread for a faster rate of application.
  • Uniform and smooth joint finishes.
  • Reduced surface porosity & voids.
  • Better coverage.
  • Self-curing.
  • Shock and impact resistance.
  • Resists water seepage.

TECHNICAL SPECIFICATIONS
PropertyWhat's Included
Pot life at 30°C min120 minutes
Compressive strength @ 28 days, Mpa8-10 Mpa after 28 days
Tensile Strength at 28 dasy, Mpa0.45 to 0.6 Mpa for 3mm - 6mm @ 28 days valid for 90% transfer
Fresh wet density (gm/cc)1.65-1.75 gm/cc
Bulk Density1.15-1.25 gm/cc
pH of mix10-12
Workability of mix (hours)Approx. 2hrs-3hrs

Other Mortar Products